Metal Panels
Aluminum panels can be created so that the image covers the entire surface, or with some metal showing through the design - for two very different looks. The choice and execution of letting the metal show through are part of our design process.
Metal panels are available in high gloss, matte, and satin finishes and in thicknesses of .03”..
-
Largest single panel can be produced to 48x96”. Multiple panels can be installed or joined and braced together in the back to create larger installations.
-
No need to worry about fingerprints or blemishes on the surface. A cloth and household cleaner can be used to clean the aluminum panels.
-
Our metal panels can have high gloss or matte finishes, with very different results.
Our work can be applied directly to drywall, wood, or other surfaces. Cabinets, doors, appliances, walls - the list is almost unlimited.
We can also work with panels that are suitable for outdoor use, as well.
-
65+ years Archivability Permanence test conducted by Wilhelm Imaging Research and Rochester Institute of Technology.
-
Though extremely rigid and durable, the recycled aluminum is lightweight, thin and easy to install or hang. Panels measure .03” or .06” thick so they provide a thin, durable design and finish over existing surfaces.
-
Normally, installations take a matter of hours, not days, and create minimal mess. They install in the same way that a thin piece of wood might be installed in the same situation.
The panels can arrive cut a little larger than the final dimensions or exactly to the dimensions. This choice is made prior to ordering.
Installation is done with readily available adhesives which lowers installation costs well below tile or marble.
-
What is delivered to the site is the finished product. No additional work or treatment is needed after installation.
-
Please refer to our installation and care guide here.
-
Our aluminum panels are produced with 90% recycled aluminum and are 100% recyclable.
-
Dyes are infused beneath the exterior coating which results in a very durable finish.
-
Sublimated aluminum holds up against high heat and meets today’s fire-rated standards for corporate and public environments.
-
Proprietary coatings provide a surface resistant to all forms of chemicals, bacteria, contaminants and pathogens.
Acrylic or Polycarbonate Panels
Acrylic
High gloss, panels with the image created on the back of 4’ x 8’ sheets.
Acrylic is perfect where the translucent quality of glass is desired. It has the same reflective qualities as glass and is beautiful and lighter-weight.
Acrylic has clear edges, eliminating the need to buy lead-free glass for edges without a blue/green hue.
Our acrylic panels are available in 4’ x 8’ sheets in thicknesses of:
Acrylic .25” (.220”)
Acrylic .375” (.375”)
Acrylic .50” (.500”)
Acrylic .75” (.750”)
Acrylic 1.00” (1.00”)
Acrylic can scratch and should be cleaned with acrylic-friendly cleaning methods and solutions.
Polycarbonate
Polycarbonate looks and feels like acrylic.
Polycarbonate resists scratching and is durable, making it the perfect wall covering material in high traffic areas. This substrate has the same reflective qualities as glass and can be a beautiful, cost-effective alternative.
Available in 4/ x 8/ sheets in thicknesses of .060” and .125” (Class A Fire Rated).